What is #1 common hardwood?
Number 1 Common (No 1) Oak. These are pictures of red oak flooring (the same principle applies to white oak flooring. Check out this article for more info on Red oak vs. white oak flooring.
What does #1 common mean in hardwood flooring?
#1 Common Hardwood
The wood used within this grade still has striations and small knots, but the coloring is much more uniform, and the striations and knots that do appear are smaller and less frequent.Nov 23, 2016
What is #1 common flooring?
No. 1 Common Grade – Characterized by prominent color variation as well as prominent (but limited in size) character marks such as knots and open checks, as well as variations resulting from drying and machining processes. This grade results in a tasteful floor where prominent variation is to be expected.
What is common grade hardwood flooring?
#2 Common or Rustic grade is very rustic in appearance, with great variation in color from board to board, visible mineral streaks, prominent, larger-sized knots and worm holes, and lots of shorter boards.Oct 6, 2015
What is oak flooring #1 common?
#1 Common White Oak flooring will have a grayish tan appearance along with dime-sized knots, mineral streaks, and color variation. The long lengths produced are typically shorter than higher grades. White Oak is not sensitive to sunlight and will not darken considerably with an oil-based finish.
What is 1 common wood?
1 Common is the standard furniture grade lumber and provides a good selection of long, medium and short cuttings at a reasonable price. No. 2A Common (also known as No. 2 Common) is the standard grade for cabinets, millwork, and other uses requiring medium to short cuttings.Jul 30, 2021
What is #1 common lumber?
The Number 1 Common grades includes boards that are a minimum of 3” wide and 4' long and will yield clear face cuttings from 66 2/3% (8/12ths) up to, but not including, the minimum requirement for FAS (83 1/3%). The smallest clear cuttings allowed are 3” by 3' and 4” by 2'.
What does common wood mean?
1 Common is a standard grade lumber with a knotty look. No. 2 Common has larger knots. It's good for paneling and shelving.
What is the difference between #1 and #2 wood?
Typically wood that is two or more inches thick is graded only for strength, denoted by #1, #2 and so on. And because stronger lumber has fewer and smaller knots, it's typically more attractive. So the general rule of thumb for lumber grades is this: the lower the number, the more strength and better appearance.