How do you use a choker chain log?

How do you use a choker chain log?

Chain Chokers

To operate one, slip the chain into the slot on the choker hook. It will remain in place once it has been installed and you apply the load. They can be difficult to slide under logs without a grab rod.Aug 23, 2021

What is a log choker?

A choker setter or choke setter is a logger who attaches cables to logs for retrieval by skidders or skylines. The work process involves the choker setter wrapping a special cable end (choker) around a log and then moving clear so the yarding engineer (e.g. skidder operator) can pull the log to a central area.

What are chokers logging?

Choker—A short piece of cable wrapped around one or more logs so that they can be hauled to a landing and loaded. Choker-setter—The person who attaches the chokers to the log.

How do you use log chains?

Wrap the chain around the log generously to ensure you have enough chains. Fasten the hook around the chain and close off any gaps. Connect the opposite end of the chain to the piece of machinery that is completing the task.Jul 21, 2022

What's a log chain?

Stout chain used for tying heavy loads to a wagon and for hitching a team to an implement or automobile that needed to be to be pulled from the mud.

What size chain do I need for pulling logs?

Grade-70 chain, also known as transportation chain, is standard in the forest industry. If you're skidding relatively small wood with horses, an ATV, or a small tractor, 1/4-inch or 5/16-inch grade-43 chain (high test) may be sufficient.Oct 15, 2016

What is a choker hook used for?

These hooks are designed to secure a load by hitching the sling around the load circumference.

How do you use a logging chain choker hook?

Chain Chokers

To operate one, slip the chain into the slot on the choker hook. It will remain in place once it has been installed and you apply the load. They can be difficult to slide under logs without a grab rod.Aug 23, 2021

How does a logging choker work?

A choker is a noose of strong cable (wire rope), which is secured around a log by hooking one-end of the cable noose to a bell that slides & cinches around the log end. On cable logging operations, the choker setter assists with safely moving and re-rigging the cables & blocks used to pull/suspend logs toward the road.

What is a tree choker?

Choker—A short piece of cable wrapped around one or more logs so that they can be hauled to a landing and loaded. Choker-setter—The person who attaches the chokers to the log. Cold-deck—A pile of stored logs, often around the base of a spar-tree.

What is a short log called?

BOLTS - Short logs or sections of a large log, usually less than 8 feet long. BUCK - To saw felled trees into smaller units, such as logs or bolts. BUTT - The base of a tree; the large end of a log.